A, the pressure between the rubber rollers is too heavy pressure between the rubber rollers will increase the friction between the rubber rollers, make the rubber rollers warm up and heat up, aggravate the squeeze expansion between the rubber rollers, accelerate the aging and deformation of the…
2022/11/15 08:46
The correct way of storage is: wash the rubber roller with clean water, then seal it with plastic film, preferably not to let it contact with air, then put it in a special storage place, do not fall east and west, affecting its internal mechanical properties and the quality of the rubber surface.…
2022/11/15 08:45
PCM Multi-Purpose Stripping Machine is in particular researched, developed and designed for treating ancient rubber rollers. PCM Multi-Purpose Stripping Machine has the blessings that: Old rubber can be shortly eliminated through a distinct ring cutter, a curler core would have a brand-new floor …
2022/11/14 17:49
It is understood that at present, China needs to import more than 300 optical contour grinders and various multi-function precision curved surface grinders every year, with each set selling at hundreds of thousands of dollars. For this reason, it is an urgent task for domestic machine tool…
2022/11/09 09:06
The Rubber Roller are roll shaped products made of metal or other materials as the core and rubber as the outer cover after vulcanization.It can be divided into: paper making rubber roller, printing and dyeing rubber roller, printing rubber roller, hulling rubber roller, metallurgical rubber roller…
2022/11/09 09:00
Printing rubber roller are mainly used to transfer ink on offset printing machines. Therefore, the rubber roller must be carefully cleaned during daily cleaning. Otherwise, the surface layer of rubber roller, pigments and resins are easy to oxidize to form a smooth and hard film, which will cause…
2022/11/09 08:54
1. PTM series Rubber Roller Covering Machine The rubber roll automatic covering machine is designed and produced to improve the rubber coating process. Suitable models can be selected for different industries. Advanced and mature equipment will bring higher efficiency to your production.2. PCM…
2022/09/27 09:56
According to statistics, a car needs to use more than a dozen kinds of rubber products and more than 100 kinds of rubber accessories, and the consumption of rubber accounts for about 70% of the world's rubber production. The severe environmental protection situation and the change of development…
2022/09/27 09:53
In the process of imprinting, many friends have encountered the problem that the machine cannot operate normally due to the lack of correct installation and maintenance of the imprinting rubber roller, so how to install, replace and clean it correctly. 1. Installation of embossing rubber rollerA.…
2022/08/11 10:56
During the embossing process, many friends have encountered the problem that the machine cannot operate normally due to improper installation and maintenance of the embossing rubber roller. Therefore, how to install, replace and clean correctly. 1. Installation of embossing rubber rollera. Select…
2022/08/11 10:55
After vulcanization, rubber products often need some post-treatment before they can become qualified products. This includes: a. trimming of rubber mold products to make the surface of the products smooth and clean and the overall dimensions meet the requirements; b. After some special process…
2022/08/11 10:48
Repair of rubber extruder screw 1. The twisted screw shall be considered according to the actual inner diameter of the barrel and manufactured according to the normal clearance with the barrel and the outer diameter deviation of the new screw. 2. After the thread surface with reduced diameter of…
2022/08/11 10:27